Using The Smartphone Screen Application; Transferring A Call To The Mobile Phone; Using Mirrorlink - SMART forfour Owner's Manual

Transferring a call to the mobile phone

X
Mobile
Select W >
Ending a call
X
End call.
Select
Using the Smartphone Screen applica-
tion
Selecting settings for the Smartphone
Screen
Selecting the preferred Smartphone Screen
application
If mobile phones support Android Auto™ as
well as MirrorLink™, the preferred applica-
tion can be selected when a mobile phone is
connected.
X
System Smartphone Screen
Select >
Smartphone Screen application pref‐
erence.
X
Select Android Auto™ or MirrorLink™.
Selecting settings to start Android Auto™
and MirrorLink™
X
System Smartphone Screen
Select >
Android Auto Settings.
or
X
System Smartphone Screen
Select >
rorLink Settings.
X
Select one of the following settings:
Ask me at each launch
R
If the Smartphone has been connected
with the smart Media-System, you will
be asked whether the preferred Smart-
phone Screen application should be
started.
Yes
R
If the Smartphone has been connected
with the smart Media-System, the pre-
ferred Smartphone Screen application
will be started automatically.
No
R
If the Smartphone has been connected
with the smart Media-System, a Smart-
phone Screen application will not be
started.
phone.
>
>
Mir‐
>
Using a mobile phone

Using MirrorLink™

Useful information
®
MirrorLink is standard for the connection
between the smart Media-System and a
mobile phone. With MirrorLink
of the display on your mobile phone can be
displayed in the smart Media-System.
MirrorLink™ is available for mobile phones
with the "Android" operating system.
Further information: http://www.smart.com/
connect.
To use MirrorLink™, observe the following
requirements:
the mobile phone must support Mirror-
R
Link™ version 1.1 and above
the mobile phone is switched on
R
a MirrorLink™ certified App must be
R
installed on the mobile phone
the GPS connection must be activated on
R
the mobile phone
the time is set on the smart Media-System
R
Setting up a connection
X
Activate MirrorLink™ on your mobile
phone (see the manufacturer's operating
instructions).
X
Connect a mobile phone with a connecting
cable to the USB socket in the centre con-
sole.
X
Select Yes.
Apps which have been certified for Mir-
rorLink™ will be shown in the smart
Media-System display.
Calling up MirrorLink™ Apps
X
Tap on the home page of the smart Media-
System .
MirrorLink™ starts in the smart Media-
System display.
X
Select the desired app.
The display switches to full screen mode.
X
To leave full screen display: press and hold
the ò button on the smart Media-Sys-
tem until the lower bar is shown.
X
To exit the display: select 2.
121
®
, the content
Z