ProSoft Technology RLX2-IHA User Manual page 62

Detailed Radio Configuration / Diagnostics
User Manual
Field
Client
Auto / Specify
Client MAC
IGMP
Spanning Tree
Advanced Config
Serial Settings
Page 62 of 161
Description
Allows the connection of an Ethernet device to any 802.11 a, b or g
access point. This mode is used in the special event of connecting a
device to another brand access point. For information on setting up a
client, see Configuring clients.
Use "specify" if device does not send out any unsolicited Ethernet
packets. Try Auto first.
MAC ID of the device connected to the radio, only if the device does not
advertise its MAC address.
Opens the IGMP Settings form. Use this form to enable (default) or
disable IGMP, and to configure how the RLX2 radio will behave when
IGMP is enabled.
Opens the Spanning Tree Settings form.
Opens the Advanced Settings form.
Opens the Serial Settings form.
RLX2 Series ♦ 802.11a, b, g, n
Industrial Hotspot
ProSoft Technology, Inc.
May 8, 2013