Sutter Instrument IPA Operation Manual page 63

Value
Value List
Value+Increment
Equation*
* see the Equation Editor section for more details
Duration
Value
Value List
Value+Increment
INTEGRATED PATCH AMPLIFIER OPERATION - M
Use a single number for the segment's amplitude
Use a different segment amplitude for each sweep, from
a list of arbitrary numbers
Create Value List dialog
Enter a list of comma separated numbers, one
for each sweep
Increment the segment's amplitude for each sweep
(Max amplitude: ±1000 mV)
Value+Increment
Start value
Operator
Increment value
Specify the segment amplitude as an equation
[free-form Equation field]
Results and errors are reported under this field.
Check Equations
Insert special identifier
Undo All changes in the editing session are discarded
Set the segment's duration. The maximum duration is
65 s per segment.
Use a single number for the segment's duration.
Use a different segment duration for each sweep, from a
list of arbitrary numbers.
Create Value List
Enter a list of comma separated numbers, one
for each sweep
Increment the segment's duration for each sweep
(Max duration: 65,000 ms)
Value+Increment
Start value
Operator
– R
ANUAL
+, -
Test the equation
Key words in equations
+, -
. 1.0.6 (20160729)
EV
63