DISCLAIMER
The IPA consists of one electronic amplifier with integrated digitizer and one headstage. The
purpose of the system is for the stimulation and measurement of cellular preparations. No other
use is recommended.
This instrument is designed for use in a laboratory environment. It is not intended for, nor
should it be used in human experimentation or applied to humans in any way. This is not a
medical device.
Do not open or attempt to repair the instrument.
Do not allow an unauthorized and/or untrained operative to use this instrument.
Any misuse will be the sole responsibility of the user/owner, and Sutter Instrument Company
assumes no implied or inferred liability for direct or consequential damages from this instru-
ment if it is operated or used in any way other than for which it is designed.
SAFETY WARNINGS AND PRECAUTIONS
Electrical
Operate the IPA using 110 – 240 VAC, 50-60 Hz line voltage. This instrument is de-
§
signed for use in a laboratory environment that has low electromagnetic noise
and mechanical vibration. Surge suppression is recommended at all times.
Fuse Replacement: Replace only with the same type and rating:
Fuse
Rating
T2.0,
250V
Type:
5 x 20 mm glass tube, Medium Time Delay (Slow Blow), RoHS compliant.
Rating:
T2.0A 250V (Time Delay, 2 Amps, 250 Volts)
Examples: Bussmann: GMC-2-R, S506-2A
Littelfuse: 239.002.P
Avoiding Electrical Shock and Fire-related Injury
§
§
Always use the grounded power cord provided to connect the system's power
adapter to a grounded/earthed mains outlet (3-prong). This is required to protect
you from injury in the event that an electrical hazard occurs.
§
Do not disassemble the system. Refer servicing to qualified personnel.
§
To prevent fire or shock hazard do not expose the unit to rain or moisture.
Line Voltage: 110 – 240 VAC
Manufacturer Examples
RoHS Compliant (Lead Free)
§
Bussmann: GMC-2-R, S506-2A
Littelfuse: 239.002.P
S
INTEGRATED PATCH AMPLIFIER
YSTEM
O
M
– R
. 1.0.6 (20160729)
PERATION
ANUAL
EV
3
Need help?
Do you have a question about the IPA and is the answer not in the manual?
Questions and answers