Description Of The Operating Controls And Indicators - Jungheinrich ECE 220 Standard Operating Instructions Manual

2

Description of the operating controls and indicators

Item Operating control or indicator
1 Master switch
(emergency stop)
2 Operating key "Horn"
3 Operating key "Lowering"
4 Operating key "Lifting"
5 Brake key
6 Controller
7 Control shaft
8 Jet Pilot
9 Key "Pedestrian operation
forward"
10 Stop button
11 Key "Pedestrian operation
backward" (not for "inching
function in drive direction on-
ly" option)
t = Standard equipment
E 2
Function
t The circuit is interrupted, all electrical func-
tions are switched off and the truck is auto-
matically braked.
t Gives an audible warning signal.
t Lowers the lifting device.
t Lifts the lifting device.
t The truck is braked at the maximum possi-
ble deceleration rate until it stands still.
t Controls the direction of travel as well as
the travelling speed.
t Is used to steer the truck.
o Is used to steer the truck.
o Travel is started in pedestrian-controlled
operation in forward direction (V) (slow
travel).
o The electrical functions are switched off
and the truck is automatically decelerated.
o Travel is started in pedestrian-controlled
operation in reverse direction (R) (slow
travel).
o = Optional equipment