Description Of The Operating Controls And Indicators - Jungheinrich EFG 316 Operating Instructions Manual

2

Description of the operating controls and indicators

Item Operating control or in-
dicator
1 Steering wheel
2 Information and service
indication
3 Parking brake
4 Steering column lock
5 Key switch
6 Accelerator pedal
7 Brake pedal
8 Driving direction switch
Multi Pilot
Horn
9 Switch lever for special
equipment
10 Master switch
Emergency Stop
11 Dual-pedal control
Driving pedal "Back-
ward"
12 Dual-pedal control
Brake pedal
13 Dual-pedal control
Driving pedal „Forward"
Driving direction switch t Selection of the desired drive direction.
14
15 Horn
16 Solo Pilot
Lifting - lowering
17 Control lever
Hoist frame - lowering
18 Control lever
Auxiliary hydraulics
(ZH1)
e. g. side shifting device
19 Control lever
Supplementary hydrau-
lic system (ZH2)
20 Changeover switch
Supplementary hydrau-
lic system (ZH3)
t = Standard equipment
E 2
Function
t Steering of the truck with 6 revolutions of the
steering wheel from the left to the right.
t Indication of the important drive and lift parame-
ters, warnings, information about operation
faults and service indicators.
t Secures the truck at standstill.
t The steering column is adjusted to the desired
distance and locked.
t Switches the control current on and off. When
the key is removed from the key switch, the truck
cannot be operated by unauthorised persons.
t The driving speed is continuously controlled.
t The truck is decelerated.
o Selection of the desired drive direction.
Controls the lift mast functions.
Trigger warning signal.
o e.g. indication whether the working lights are
switched on
t Switch electric power supply on and off.
o Truck drives backwards when actuated.
Driving speed is controlled continuously.
o Truck is decelerated.
o Truck drives forwards when actuated.
Driving speed is controlled continuously.
t Trigger warning signal.
t The fork is lifted or lowered.
t The fork is inclined to the front or to the back.
o The fork is moved to the right or left.
o Intended for hydraulic attachments.
o Change over from ZH2 to ZH3
o = Optional equipment