Jungheinrich ECE 220 Standard Operating Instructions Manual page 58

Battery: 9.1 Check acid density, acid level and cell voltage
9.2 Check the terminals for secure attachment and apply
9.3 Clean the battery connections; check for tight fitting
9.4 Check the battery cables for damage, renew if necessary
Lifting 10.1 Check performance, wear and adjustment
device:
10.2 Perform a visual check of rollers, sliding elements, and
10.3 Check the fork tines and fork carrier for wear and damage l
Lubrication: 11.1 Grease the vehicle in accordance with the lubrication
General 12.1 Check the electrical system for a grounding fault
measure-
12.2 Check the driving speed and braking distance
ments:
12.3 Check the lifting and lowering speed
12.4 Check safety and shutdown devices
Demon- 13.1 Perform a trial run under a nominal load
stration:
13.2 Upon completion of servicing operations, demonstrate the
grease
stops
schedule
vehicle to the person responsible
Maintenance intervals
= t W A B C
Standard
= k
Cold store
l t
l t
l t
t
t
l t
t
l t
t
t
t
t
t
l t
F 5