Jungheinrich ECE 220 Standard Operating Instructions Manual page 27

Item Operating control or indicator
12 Code lock
Keyboard
(CANCODE)
13 Display instrument
(CANDIS)
14 Code lock
15 Control shaft adjustment
16 Driver standing platform
17 Seat (XL version only)
t = Standard equipment
E 4
Function
o Replaces the key switch.
Switches control voltage on and off.
Releases the truck functions.
o Code settings.
Releasing and selecting the travel pro-
grammes.
Entering travel parameters.
o Operating hours meter.
Battery capacity display.
Displaying travel parameters and service
indicators.
Shows the operating hours of the trucks.
t Switches the truck on and off.
Removing the key secures the truck
against switching on by unauthorised per-
sonnel.
t The control shaft can be set to the desired
position.
t – released (without load): Travel blocked,
or truck decelerates.
– actuated (with load): Travel is released.
o In connection with pedestrian-controlled
operation.
– without load: Travel at reduced speed.
– with load: Travel at full speed.
o The seat height can be adjusted in four po-
sitions.
o = Optional equipment