Controls And Displays - Jungheinrich EJC 212-220 Operating Instructions Manual

2

Controls and Displays

Item Control /
Display
1 Battery connector
(Emergency Stop)
2 Charging display
on charger
3 Key switch
4 Keypad
(CANCODE)
ISM access module
5 Battery discharge
indicator
Display instrument
(CANDIS)
6 Tiller
7 Crawl button
8 Travel switch
t = Standard equipment
E 2
EJC Function
212-220
t
Interrupts the circuit, all electrical functions are
cut out. The truck automatically brakes.
o
Indicate the charge status (see Chapter D).
t
Switches control current on and off. Removing
the key prevents the truck from being switched
on by unauthorised personnel.
o
Switches control current on and off.
Code settings.
Release and select the travel programs.
Enter travel parameters.
o
Code settings.
Release and select the travel programs.
Enter travel parameters.
t
Battery charge status.
o
Operating hours meter.
Battery charge status.
Displays service messages and travel
parameters in combination with CANCODE.
t
Used to steer and brake the truck.
t
If the tiller is in the upper braking zone, braking
can be overriden by pressing the switch, and
the truck can move at reduced speed (crawl
speed) .
t
Controls travel direction and speed.
o = Optional Equipment