Table of Contents
Advertisement
2
Controls and indicators
Item
Control / display
1
Front panel
2
Tiller
3
Brake button
4
Controller
5
Tiller
6
Warning signal (horn) button
7
"Lower" button
8
"Lift" button
9
Battery discharge indicator
10 Display instrument (CANDIS) o Hourmeter display
11 Key switch
12 CANCODE keypad
13 Battery connector
(Emergency Disconnect)
14 Pressure sensitive mat
(all functions released when
occupied)
t = Standard equipment
E 2
t The complete hydraulics and control electronics
are located behind the front panel.
t Important control elements are located in the tiller
arm.
t The truck brakes at the maximum rate until it
comes to a halt.
t Controls travel direction and speed
(see Section 4.2)
t Moving tiller;
Steering and braking:
Set to brake zone (B) (see page E9):
Truck is braked mechanically.
Set to travel zone (F) (see page E9):
The mechanical brake is released and the truck
is ready for operation.
t Sets off the warning signal.
t Lowers the load forks.
t Raises the load forks.
t Battery charge status.
Displays battery capacity.
Shows the battery residual capacity and the
operating hours completed by the truck
t Switches control current on and off. Removing
the key prevents the truck from being switched
on by unauthorised personnel.
o Code settings
Travel program release
t Pulling the battery connector interrupts the supply
current and deactivates all electrical functions,
causing the truck to brake automatically.
t – Pressure sensitive mat occupied:
Travel and all functions released.
– Pressure sensitive mat unoccupied:
The truck coasts.
o = Optional equipment
Function
Advertisement
Chapters
Table of Contents
