Jungheinrich ECE 220 Standard Operating Instructions Manual page 50

Battery parameters
Z
For trucks without indicator instrument (CANDIS (o)) the code lock parameters can
only be set by the manufacturer's service.
The parameters are set in the same way as for the travel parameters.
The following parameters can be entered:
No.
Battery parameters
411 Battery type (normal/
high-power/dry)
412 Discharge monitor func-
tion
Setting value 0 / 1 is to be interpreted as: 0 = off 1 = on
Function Range Standard
Setting value Setting
value
0 - 2
0 / 1
Comments
0 0 = Normal (wet)
1 = High-power (wet)
2 = Dry
(maintenance-free)
1
E 27