Description Of The Operating Controls And Indicators - Jungheinrich EME 112 Operating Instructions Manual

2

Description of the operating controls and indicators

Item Control or indicator
1 Collision protection button
2 Controller
3 Button "Lift load lifting device"
4 Button "Lower load lifting de-
vice"
5 Button "Horn"
6 Button - Manoeuvering
7 Integrated charger
(incl. safety cut-out)
8 Key swith with integrated
emergency-off button
9 Charging connection for 24 V
lorry chargind cable (o)
10 Discahrge control LED
(discharge indicator)
t = Standard equipment
E 2
Function
t
The truck moves away from the ope-
rator.
t
Controls the direction and speed of
travel.
t
For lifting the load lifting device.
t
For lowering the load lifting device.
t
Triggers an acoustic signal.
t
If the control shaft is in the upper bra-
king range, the braking action can be
overriden by a button and the truck
can be moved with decreased speed
(manoeuvering).
The battery is charged when the
t
mains plug is plugged into an electric
outlet.
t
For switching the control current on
and off. Removing the key prevents
the truck from being switched on by
unauthorised persons.
o
Charging battery by plugging in the
24 V lorry charging cable.
t
Shows the charging condition of the
battery (refer to chapter D).
o = Optional equipment