Jungheinrich ECE 220 Standard Operating Instructions Manual page 45

No.
Code lock
020 Start-up
drive programme
021 Travel programme 1*
Enable
022 Travel programme 2*
Enable
023 Travel programme 3*
Enable
030 Memory allocation*
display
)
* only in conjunction with indicator instrument (CANDIS (o))
Keyboard error messages
The following errors are indicated by a red flashing LED (21):
– New master code is already operator code.
– New operator code is already master code.
– Operator code to be changed does not exist.
– Tried to change the operator code to an existing code.
– Operator code to be deleted does not exist.
– Code memory full.
E 22
Function
Setting value
)
)
)
)
Range Default
Setting val-
ue
0-3 2
0 or 1 1
0 or 1 1
0 or 1 1
Comments
Work flow
0 - There is no start-up
programme
1 - Drive programme 1 =
start-up drive programme
2 - Drive programme 2 =
start-up drive programme
3 - Drive programme 3 =
start-up drive programme
0 = Travel programme
not enabled
1 = Travel programme
enabled
0 = Travel programme
not enabled
1 = Travel programme
enabled
0 = Travel programme
not enabled
1 = Travel programme
enabled
The CANDIS display indi-
cates the number of user
codes in use when the
parameter is typed.