Starting The Treadmill Desk - LifeSpan DT7 Owner's Manual

Workplace treadmill desk/bike desk

Hide thumbs Also See for DT7:

Table of Contents

Treadmill Desk Operation

Starting the Treadmill Desk

Turn the On/Off toggle switch located on the front right corner of the

treadmill to the On position. If this is already On, press the On/Off button

to turn On the console.

Make sure the Safety Key is engaged in the console.

NOTE: The display will show "–––" if the Safety Key is not engaged.

Please make sure that the Safety Key is fully engaged. It is possible

the display will not show "–––" when just partially engaged.

Press the Start button to start the treadmill belt. The console will start

counting up from 0:00.

Press the Up/Down buttons to adjust speed, or use the Preset button to

go directly to your preferred speed (which defaults to 1.5 mph). See the

separate section on Preset, as well as the section on Settings, for more

details.

Table of Contents

Show Quick Links

Table of Contents