LifeSpan DT7 Owner's Manual page 15

Desk Assembly
Step 2: Attach Base Foot (Continued)
5mm Allen
Wrench w/
Phillips
D. Connect the Left Base Foot(6) to the Left Motorized Leg(5) with
the four installed M8x55L Bolts with Washers(14).
E. Fully tighten each of the four bolts.
F. Tip the left post on its side.
G. Repeat the same procedure on the right side.
20
6
5
M8x55L (x8)
NOTE:
If using a 5 or
6 foot desktop
you can still
use the Desk
Position
Bumper on
one side of
your treadmill.