LifeSpan DT7 Owner's Manual page 17

Desk Assembly
Step 4: Attach Reinforcement Frame
Contents: 8 each M8x35L Bolts/Washers, 6 each M6x15L Screws,
A. Locate the Front Reinforcement Frame labelled (1) and the Back
Reinforcement Frame labeled (2). Place these frames on Desktop with
screw tabs down and facing each other as shown in figure below.
B. Extend Front and Back Reinforcement Frames(1, 2) to align all
mounting holes with Desktop(3) and Motorized Legs(4, 5).
C. Loosely install the eight M8x35L(16) bolts through the
Reinforcement Frames (1,2) and into the Motorized Legs (4,5).
D. Tighten all eight M8x35L(16) bolts.
16
16
4
22
LOCATE BAG LABELED STEP 4
4 each M8x12L Screws/Lock Washers.
20
Center Positions
17
17
16
16
17
17
20