Connect To An Ethernet Network; How To Connect To Virtual Private Networks - Honeywell CN75 User Manual

6. Enter the proxy settings for the network.
7. Tap Save.
Disable Wi-Fi Notifications
By default, when Wi-Fi is enabled, you receive notifications in the Status bar when
the computer discovers a wireless network. You can disable these notifications.
1. Tap All Apps > Settings > Wi-Fi.
2. Tap
3. Tap the Network notification switch to disable

Connect to an Ethernet Network

To connect the computer to an Ethernet network, you need an Ethernet dock.
1. Make sure the dock is connected to your Ethernet network.
2. Place the computer in the dock.
3. Tap All Apps > Settings > Ethernet.
4. Verify Ethernet is On
5. Tap Ethernet. The Ethernet list shows the name of the current Ethernet
6. (Optional) To assign a static IP address.

How to Connect to Virtual Private Networks

The computer supports connecting to virtual private networks (VPNs). This section
describes how to add and connect to VPNs. To configure VPN access, you must
obtain details from your network administrator.
You manage VPN connections in the Settings app.
Note: Before you can add or connect to a VPN network, you must enable a screen lock
method.
64
, and then select Advanced.
connection. By default, the computer assumes a DHCP connection, and that
your network has assigned an IP address automatically. If DHCP is working, the
Ethernet dock should indicate that communication with the network is
occurring.
a. Tap the connection name (for example, eth0).
b. Tap DHCP and then select Static from the list.
c. Enter the required network information, and then tap Apply.
.
75 Series Mobile Computer User Guide
notifications.