Configure Proxy Settings For A Wi-Fi Network; Disable Wi-Fi Notifications; Connect To An Ethernet Network - Honeywell CK65 Series User Manual

•

Configure Proxy Settings for a Wi-Fi Network

If you need to connect to network resources through a proxy server, you can
configure settings for the proxy server for each Wi-Fi network you add. By default,
the Wi-Fi networks you add are not configured to connect through a proxy server.
Note: Proxy settings apply only to the Wi-Fi network you modify. You must change proxy
settings for each network requiring a proxy server.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Select the network to display the Network details.
4. Tap the Edit icon
5. Tap Advanced options.
6. Under Proxy, select Manual.
7. Enter the proxy settings for the network.
8. Tap Save.

Disable Wi-Fi Notifications

By default, when Wi-Fi is enabled, you receive notifications in the Status bar when
the computer discovers a wireless network. You can disable these notifications.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Navigate to the bottom of the discovered network list.
4. Select Wi-Fi preferences.
5. Tap Notify for public networks to toggle the setting On or Off.

Connect to an Ethernet Network

To connect the computer to an Ethernet network, you need a CK65 Ethernet Home
Base or a CK65 Net Base.
1. Make sure the base is connected to your Ethernet network.
2. Place the computer in the base.
CK65 Mobile Computer User Guide
To remove a network from your saved list, tap the network name and select
Forget. You can do this for networks you no longer use.
> Network & internet > Wi-Fi. The list of available Wi-Fi
networks appears.
> Network & internet > Wi-Fi. Verify the WLAN radio is turned
On.
.
75