70 Series Accessories - Honeywell CN75 User Manual

70 Series Accessories

The mobile computer ships with a battery, a stylus and hand strap. Non-Incendive
models also ship with an I/O cover. All other accessories are sold and ordered
separately. For help, contact your local Honeywell sales representative.
Note: All 75 Series mobile computers are compatible with 70 Series accessories.
Accessory
Audio Snap-On Adapter
Back Accessory Interface
Battery Model 1001AB01
Battery Model 1000AB02
Desktop Stand
DEX/UCS Snap-On Adapter
DX1 Desktop Dock with USB
connectivity
DX2 Dual Dock and DX4 Quad
Dock. The DX2 and DX4 are
available in charge-only and
Ethernet configurations.
Ethernet Snap-On Adapter
Handstrap Replacement Kit
Holster
RS-232 Snap-On Adapter
Scan Handle
Tethered Stylus Replacement
Kit
USB Snap-On Adapter
75 Series Mobile Computer User Guide
Description
Use the audio adapter to connect the computer to a headset.
Use the back accessory interface to attach accessories such as
the magstripe reader adapter to the CK75.
This battery provides main power to the CK75.
• Standard Rechargeable Li-ion battery
(Model 1001AB01/PN 318-046-031)
• Cold Storage Rechargeable Li-ion battery
(Model 1001AB01/PN 318-046-032)
This battery provides main power to the CN75 and CN75e.
Standard Rechargeable Li-ion battery
(Model 1000AB02/PN 318-043-033).
Use the desktop stand to hold the 75 Series computer on your
desk or a stable surface.
Use this adapter to receive and send serial communications
through a DEX/UCS connection.
Use the desktop dock with the:
• Computer cup to charge the battery while it is installed in
the computer.
• Battery cup to charge the battery.
Use these charger bases with the:
• Computer cup to charge batteries while they are installed
in the computer.
• Battery cup to charge two batteries.
Use the Ethernet adapter to be able to connect the computer to
an Ethernet network.
You can order and install a replacement handstrap for the CN75,
CN75e, and CK75. Each kit contains 5 handstraps.
Use the holster to store the computer when you need your hands
free.
Use the RS-232 adapter to convert the connector on the bottom
of the computer to a serial connector.
Use the scan handle to provide better ergonomics to the
computer for high-volume scanning applications.
You can order and install a replacement stylus.
Use this adapter to convert the bottom connector of the
computer to a USB connector.
33