How To Transfer Files; Configure Usb Connection And Transfer Files - Honeywell CN75 User Manual

How to Transfer Files

To transfer files you need to physically connect the mobile computer to your
desktop PC through a USB connection. When the computer is connected through
USB and configured for file or photo transfer, you can browse to it and drag-and-
drop to move files back and forth to a Windows® PC. If you are transferring files to
and from a Mac, use the Android File Transfer application (available from
www.android.com/filetransfer).
Note: File transfer through a USB connection is disabled by default. You need to configure
the USB connection for transferring files or photos. USB tethering must be turned off
before you can transfer files through USB.
You can use these accessories to connect your mobile computer to your PC:
•
•
Note: To learn more about accessories available for 75 Series computers, go to
www.honeywellaidc.com

Configure USB Connection and Transfer Files

1. Connect the mobile computer to your PC using a USB charge/communication
2. By default, the mobile computer is in USB charging only mode.
3. Swipe down from the notification/status bar at the top of the screen.
4. Tap the USB for Charging notification.
5. Select Transfer files (MTP) or Transfer photos (PTP).
6. Open a file browser on you PC and navigate to the 75 Series computer.
32
USB snap-on adapter with power supply and USB cable
Desktop Base with battery cup, power supply and USB cable
accessory.
To enable file transfers, swipe down from the notification/status bar.
You can now copy, delete, paste and/or move files or folders between the two
computers and any SD card installed.
or contact your local Honeywell sales representative.
75 Series Mobile Computer User Guide