4.2. Mounting
Fig. 1
4.2.1.
.
Operating manual 810378-BAL-EN-170330
HV-Supply without integrated discharger
Grounded surface
WARNING
Overtightening of the screws can cause cracks.
WARNING
The HV generator must be installed without clearance on a
grounded plate, to prevent electrostatic charging of the back.
WARNING
Do not disconnect connections under voltage.
4 screws M5 x 25 (16) – e.g. DIN 912
Value in brackets = smart-E 310
Value without brackets = smart-E 510
Mach/30 2017
Page 15 of 54