Safety; Ergonomics; External Materials; Disposal - Signostics uscan User Manual

8. S
AFETY

Ergonomics

Warning
 Avoid musculoskeletal strain with prolonged use of Uscan. Follow guidelines below.
The Uscan is intended for quick-look applications by qualified health professionals. It is not intended for
continual use in radiology or other departments. If you need to use the device for a continual period, take the
following precautions:
 Position yourself comfortably, either with a chair with appropriate lower back support or by sitting or
standing upright.
 Minimize twisting, relax your shoulders and support your arm with a cushion.
 Hold the probe lightly, keep your wrist straight and minimize the pressure applied to the patient.
 Take regular breaks.

External materials

The parts of the device that come into patient contact are biocompatible as assessed in ISO10993-1.

Disposal

Warning
 Do not incinerate or discard the device in general waste at end of life. The lithium battery is a potential
environmental and fire safety hazard.
Uscan contains lithium-polymer batteries and the system should be disposed of in an environmentally
responsible manner in compliance with federal and local regulations. It is recommended the system is taken to
a recycling center which specializes in the recycling and disposal of electronic equipment.
Where the device has been exposed to biologically hazardous material it is recommended the device be
disposed of using biohazard containers and in compliance with federal and local regulations. It is
recommended the system is taken to a waste center which specializes in the disposal of biohazard waste.

Electrical safety

Warning
 Uscan complies with the requirements of IEC 60601-1:3
electrical shock, comply with all safety instruction and warnings.
 The user must not touch the any device connectors while in physical contact with the patient.
 The Uscan probe is connected to an Android display running Signostics software to configure a
medical system. The Android display must be certified to the respective IEC standards and particular
national deviations (IEC 60950 or IEC 60601-1:2nd and/or 3rd edition).
 Do not connect the Uscan display to external computers or peripherals using the USB port unless the
system is outside the patient area. Failure to comply with these guidelines may result in electric shock.
 Only connect accessories that are specified as being compatible with Uscan. Contact
customer support or your Signostics distributor for information on compatible accessories and
systems.
 When using the optional Signostics mobile stand, if a Multiple Socket Outlet is required only use an
outlet and power cable certified to IEC 60601-1, and fix to the stand using a bolt and tool.
P003948
rd
Edition. To avoid the risk of injury or
Uscan User Manual
Signostics
Page | 43