Entering Patient Details; Printing - Signostics uscan User Manual

Entering Patient Details

Patient details will be required if data is saved. Patients may already be stored in the system or they may need
to be entered.
Search for Patient
Existing Patient
Tab
Patient List
The source for patient names is a preference setting (see
or a remote server.
The list of patients is displayed under the Existing Patients tab. Tap the patient name to select a from the list.
When querying patients from a remote server you may need to type a few letters into the search field to display
patients.
The Search field
Tap the Bar-code icon
Tap the Skip icon to bypass patient data entry. Note: you will be prompted to enter patient details again when
saving the exam.
Tap the New Patient tab to enter the details for a new patient using the on-screen keyboard.

Printing

Tap the Printer icon
Bluetooth Printer Setup (Optional)).
Network printing uses a Mopria service (see
www.mopria.org) enabling printing to thousands of
network printer types. The Uscan needs to be connected
via WiFi to the same network as the printer. To print:
 Tap the icon.
 Tap PRINT ALL to print all scans, or PRINT
SELECTION to print only selected scans.
 Select the printer from the drop down list.
 If required, adjust number of copies, paper size,
colour, orientation, or any other options provided
by the printer.
 Tap the icon to send to the printer.
P003948
Fig 4.4 Entering Patient Details
can be used to find an existing patient.
or use a bar-code scanner to search using a patients bar-code.
to print to a Network (see
Uscan User Manual
Preference SetupSettings), and may be local storage
Network Printer Setup (Optional)) or Bluetooth printer (see
Fig 4.5 Network Printing
Bar code Entry
Skip
New Patient Tab
Page | 30