Chapter 10 - Storage And Callback; Set Up Storage And Callback; Waveform Storage And Callback - UNI-T UTD2000CEX-II Series User Manual

On the upper left corner of the display area, BY and AY are represented by
the current position of the cursor BY and AY respectively. BY-AY indicates
the voltage difference between the two cursors.

Chapter 10 - Storage and Callback

With the storage function, you can save the oscilloscope's settings,
waveforms, and screen imagees to the oscilloscope's internal or external
USB storage devices, and recall the saved settings or waveforms anytime.
Press the STORAGE key to enter the storage function setting interface.
UTD2000CEX-II series oscilloscope supports FAT format USB storage devices.
It is not compatible with NTFS format.
10.1 Storage Setting and Callback
Press STORAGE button, then press F1 to select the type of settings, then
to enter the storage menu
Settings for the storage menu.
Options Descriptions
Functions
Type Storage Setting
Source CH1,CH2
Data will be saved on the oscilloscope
DSO
Disk
USB Data will be saved on USB drive
Saves settings to selected disk
Save
Call back previously saved settings,
returns the oscilloscope to the
Callback
previously saved setting state
Remarks
Oscilloscope can only select USB device when U disk or other external
storage devices are plugged in.
Callback only works when previously saved disk and the file name are
consistent, or else it will fail to load.

10.2 Waveform Storage and Callback

Press the STORAGE button, then press F1 to set the type of waveform ,
then to enter waveform storage menu.
Waveform storage menu.
Options Descriptions
Functions
Type Waveform Storage
Select waveform storage source
CH1, CH2
Source
from any one of CH1,CH2
When Save is pressed, waveform
DSO
will be saved to the oscilloscope
Disk
When Save is pressed, waveform
USB
will be saved to external USB device
Save Saves the waveform to selected disk
Callback Enter the REF menu for the details
UTD2000CEX-II
User Manual