Table 6-5
Menu
Settings
Type
Pulse
Width
Polarity
Positive
Negative
Qualifier
=
<
>
Time
---
6.4.4 Video Trigger
Trigger on fields or lines of NTSC or PAL standard signals if video trigger is selected.
50
Figure 6-10 Trigger-Pulse Wdith Type
Description
Set trigger Type to Pulse Width
Set positive pulse width as trigger signal.
Set negative pulse width as trigger signal.
Trigger when input pulse width equals to set value;
Trigger when input pulse width is less than set value;
Trigger when input pulse width is greater than set
value;
To set up pulse width time value, use Left and Right
arrow buttons to set the value when the menu is
displayed.
U TD1000L User Manual