Chapter Xiv Technical Information - UNI-T UTD2052CL+ User Manual

Chapter XIV Technical Information

Except for those specifications marked with "Typical", all specifications have warranties.
Unless otherwise specified, all technical specifications are applicable to the probes with
attenuation switch set as 10× as well as UTD2000 series DSO. DSO must first meet the
following two conditions to meet those specification standards:

The instrument must continuously operate for over half an hour within the operating
temperature.

If the change scope of operating temperature is or exceeds 5°C, please perform the
"Self-Adjustment" function in the UTILITY system function.
Acquire System Specification
UTD2052
Model
CL+
Real-time 500MS/s
Equivalence 50GS/s
When the sampling times of all channels are N, N can be chosen among 2, 4, 8, 16, 32, 64, 128
Average
and 256
Input Channel Specifications
Input Coupling DC, AC and GND
(1MΩ± 2%)//(18pF± 3 pF)
Input impedance
Probe attenuation
0.01×/0.02×/0.05×/0.1×/0.2×/0.5×/1×/2×/5×/10×/20×/50×/100×/200×/500×/1000×
coefficient
Maximum input
400Vpk, the transient over voltage is 1000 Vpk.
voltage
Horizontal System Specification
Time-base scale 2ns/div-50s/div
Waveform Sin(x)/x
interpolation
Time-base
≤(50+2×Service life)ppm
accuracy
Record length 2×512k sampling point
Storage depth Single channel: 64k；Double channel: 32k
±50ppm (any time interval ≥1ms )
Sampling rate and
delay time
accuracy
UTD2102CL
UTD2072
PRO
CL
UTD2102CL+
500MS/s 500MS/s
50GS/s 50GS/s
59
UTD2000 Series User Manual
UTD2152 UTD2102 UTD2152
CL CEX+
500MS/s 1GS/s
50GS/s 50GS/s 50GS/s
UTD2202
CEX+
CEX UTD2202
PRO
1GS/s 1GS/s
50GS/s