Advertisement
2. Brief introduction
UT-P35&UT-P36 high voltage isolating probe applies differential input
mode. It is used at the location need to measure high voltage or isolate
from ground usually.
UT-P35&UT-P36 high voltage isolating probe supplies two attenuation
ranges 1/50 and 1/500 to be selected. The Maximum measurable
differential voltage are 130V (DC + peak AC) and 1300V (DC + peak
AC) accordingly.
UT-P35&UT-P36 high voltage isolating probe has over range alarm
function. It indicates with a red LED.
UT-P35&UT-P36 high voltage isolating probe is small and robust. It has
very high stability, reliability and accuracy.
It may be used at the following location usually:
Measure without connect to ground
Measure a high voltage or strong electricity
Switch-mode power supplies design
Power convert design
AC inverter and UPS
Transducer design
Electronic ballast design
Electromotor drive design
CRT display design
Electric and electronic experiment
5
Advertisement
