Javad HPT404BT Operator's Manual page 34

Command Line Interface
Diagnostics and Identification Commands
STATE
STATE [Parameter Name] [Parameters List] [/?]
Parameter
Name
RSSI
BER
FREQ
TEMP
SYNC
MODE
VHPA
BT
The STATE command without Parameter Name indicates all values as shown below:
RSSI =-141 dBm
BER =0E-0
FREQ =435.000000 MHz
CHAN =-4
TEMP =32
SYNC =0
MODE =FIXED
VHPA =11.75 V
BT =ON
34
-15 to -137 dBm - Indicates the Receive Signal Strength in dBm
0 to 9.9E-3 - Indicates the BER level
406.000000 to 470.000000 MHz - Displays the central frequency of the operating
channel
-30.C to 100.C. Displays the temperate inside of enclosure.
0 - if link is not established yet
1 - indicates the link established
AUTO/FHOP/FIXED
VCC V
ON/OFF
Parameter List
www.javad.com