Installing Optional Idsdm Or Vflash Card - Dell EMC PowerEdge T640 Installation And Service Manual

Figure 73. Removing the optional IDSDM/vFlash card
NOTE: There are two dip switches on the IDSDM/vFlash card for write-protection.
Next step
Install the optional IDSDM/vFlash card.
Related link
Removing the air shroud
Removing the MicroSD card

Installing optional IDSDM or vFlash card

Installing optional IDSDM or vFlash card
Prerequisite
Follow the safety guidelines listed in
Steps
1 Locate the IDSDM/vFlash connector on the system board.
To locate IDSDM/vFlash, see the System board jumpers and connectors section.
2 Align IDSDM/vFlash card with the connector on the system board.
3 Push IDSDM/vFlash card until it is firmly seated on the system board.
Safety instructions.
Installing and removing system components 131