Status Led Indicators - Dell EMC PowerEdge T640 Installation And Service Manual

6
7
8
9
10
11
12
13

Status LED indicators

NOTE: The indicators display solid amber if any error occurs.
14 Dell PowerEdge T640 overview
USB port
VGA port
USB port
Micro USB port
Optical drive (optional)
Hard drive slots
Rack ear latch (2)
Drive blank
N/A
N/A
activated. The Quick Sync 2
feature allows management of
the system using mobile devices.
This feature aggregates
hardware/firmware inventory
and various system level
diagnostic/error information that
can be used in troubleshooting
the system. You can access
system inventory, Dell Lifecycle
Controller logs or system logs,
system health status, and also
configure iDRAC, BIOS, and
networking parameters. You can
also launch the virtual Keyboard,
Video, and Mouse (KVM) viewer
and virtual Kernel based Virtual
Machine (KVM), on a supported
mobile device. For more
information, see the Integrated
Dell Remote Access Controller
User's Guide at Dell.com/
idracmanuals.
This USB port is USB 2.0
compliant.
Enables you to connect a display
device to the system. For more
information, see the Technical
specifications section.
The USB port is USB 3.0
compliant.
The iDRAC Direct port is micro
USB 2.0-compliant. This port
enables you to access the iDRAC
Direct features. For more
information, see the iDRAC
User's Guide at Dell.com/
idracmanuals.
One optional slim SATA DVD-
ROM drive or DVD+/-RW drive.
Enable you to install drives that
are supported on your system.
For more information about
drives, see the Technical
specifications section.
Allows you to secure the system
to a rack
Drive blank