Installing A Nvme Drive Bay Or Flex Bay - Dell EMC PowerEdge T640 Installation And Service Manual

Figure 46. Removing a NVMe drive bay or flex bay
Next step
Install the NVMe drive bay.
Related link
Removing a hard drive backplane

Installing a NVMe drive bay or flex bay

Installing a NVMe drive bay or flex bay
Prerequisite
NOTE: The procedure to install the flex bay is identical to installing the NVMe drive bay.
Follow the safety guidelines listed in
Steps
1 Align the tabs on the NVMe drive bay with the slots on the front of the system.
2 Insert the NVMe drive bay into the system until the tabs click into place.
3 Using the Phillips #2 screwdriver secure the NVMe drive bay to the system.
Safety instructions.
Installing and removing system components 101