Next step
Install the rSPI card.
Related link
Removing the system board
Installing the rSPI card
Installing the rSPI card
Prerequisite
Follow the safety guidelines listed in
CAUTION:
To prevent damage to the rSPI card, you must hold the card only by its edges.
Steps
1
Align the screw hole on the rSPI card with the standoff on the system board.
2
Using the Torx #4 screwdriver, replace the screw to secure the rSPI card to the system board.
Figure 52. Installing the rSPI card
Next steps
1
Install the system board.
2
Follow the procedure listed in
Related link
Installing the rSPI card
Installing the system board
100
Installing and removing system components
Safety
instructions.
After working inside your
system.