System Weight; Processor Specifications; System Battery Specifications; Memory Specifications - Dell PowerEdge FC640 Installation And Service Manual

Hide thumbs Also See for PowerEdge FC640:
Table of Contents

Advertisement

System weight

Table 7. System weight
System
Dell EMC PowerEdge FC640

Processor specifications

The PowerEdge FC640 system supports up to two Intel Xeon scalable family processors.

System battery specifications

The PowerEdge FC640 system supports CR 2032 3.0-V lithium coin cell system battery.

Memory specifications

The PowerEdge FC640 system supports DDR4 registered DIMMs (RDIMMs) and load-reduced DIMMs (LRDIMMs). Supported memory
bus frequencies are 2133 MT/s, 2400 MT/s, and 2666 MT/s.
Table 8. Memory specifications
Memory module sockets
Sixteen 288-pin

Storage controller specifications

The PowerEdge FC640 system supports PowerEdge RAID Controller (PERC) H330, PERC H730P, S140 (SATA and NVMe drives) and
Boot Optimized Server Storage (BOSS M.2).

Drive specifications

Hard drives

The PowerEdge FC640 system supports up to two 2.5-inch, hot-swappable SAS/SATA hard drives, SSDs, or PCIe NVMe drives.

Ports and connectors specifications

USB ports

The PowerEdge FC640 system supports:
14
Technical specifications
Memory capacity
8 GB, 16 GB, or 32 GB single
rank or dual rank (RDIMMs)
64 GB quad rank (LRDIMMs)
Maximum weight
5.8 kg (12.79 lb)
Minimum RAM
8 GB with dual processors
(minimum one memory module
per processor)
Maximum RAM
Up to 512 GB RDIMM
Up to 1 TB LRDIMM

Advertisement

Table of Contents
loading

Table of Contents