Table of Contents
Advertisement
Network Daughter Card
The Network Daughter Card (NDC) is a small, removable mezzanine card. The NDC provides you with a flexibility of choosing different
network connectivity option, for example—4 x 1GbE, 2 x 10GbE or 2 x Converged Network Adapter. Your system supports one x8 PCIe
Gen 3 card.
Removing the Network Daughter Card
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Remove the PCIe mezzanine card.
Steps
1
Using the Phillips #2 screwdriver, remove the two screws that secure the Network Daughter Card (NDC) to the system board.
CAUTION:
To prevent damage to the NDC, you must hold the card only by its edges.
2
Lift the card from the system board.
Figure 35. Removing the Network Daughter Card
Next step
1
Install the NDC.
Related link
Removing the PCIe mezzanine card
Installing the Network Daughter Card
Safety
instructions.
Before working inside your
system.
Installing and removing system components
79
Advertisement
Table of Contents
