Table of Contents
Advertisement
Figure 33. Installing the heat sink onto the processor
Next steps
1
Install the processor and heat sink module.
2
Install the air shroud.
3
Follow the procedure listed in
Related link
Installing a processor and heat sink module
Installing the air shroud
Installing a processor and heat sink module
Prerequisites
CAUTION:
Never remove the heat sink from a processor unless you intend to replace the processor. The heat sink is necessary to
maintain proper thermal conditions.
WARNING:
The heat sink may be hot to touch for some time after the system has been powered down. Allow the heat sink to
cool before removing it.
Follow the safety guidelines listed in
Steps
1
Align the pin 1 indicator of the heat sink to the system board and then place the processor and heat sink module (PHM) on the
processor socket.
After working inside your
system.
Safety
instructions.
Installing and removing system components
77
Advertisement
Table of Contents
