Table of Contents
Advertisement
Figure 29. Loosening the processor bracket
3
Lift the bracket and the processor away from the heat sink, and place the processor connector side down on the processor tray.
4
Flex the outer edges of the bracket to release the processor from the bracket.
NOTE:
Ensure that the processor and the bracket are placed in the tray after you remove the heat sink.
Figure 30. Removing the processor bracket
Next step
Install the processor into the processor and heat sink module.
Related link
Removing the air shroud
Removing a processor and heat sink module
Installing the processor into a processor and heat sink module
74
Installing and removing system components
Advertisement
Table of Contents
