Table of Contents
Advertisement
28
PADS SEQ MOTOR SENSORY:
PARAMETER
Carrier frequency:
Burst frequency:
Burst rate scan:
Burst scan time:
Beat:
Sweep:
Rate Scan Time:
Modulation:
Vector:
Auto Intensity:
Treatment time:
Waveform:
Output:
The Noxious Probe mode contains one pre-programmed mode. All parameters may be varied during operation and
saved by the user. The following program is available in Noxious Probe mode:
PROBE NOXIOUS
PARAMETER
Pulse rate:
Polarity:
Stim time:
Waveform:
Output:
The Nerve Block modality contains one pre-programmed Pad mode and one pre-programmed Probe mode. In Pad
mode, output is provided through the output A-B jacks. The phase of the channels is indicated by the color of the tip
pins. The black wires are of the same phase and the red wires in the opposite phase relative to each channel. All
variable parameters may be altered during operation.
COPYRIGHT © 2006 - 2017, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED
DEFAULT VALUES
5.0 KHz
2 - 15 - 100 Hz
20%
10 seconds
ON
0%
30 minutes
Burst Alternating Current
0 mA
Probe Noxious
Sensory / Noxious
Waveform
DEFAULT VALUES
4.0 Hz
+/-
60 Seconds
Monophasic or Biphasic square wave
pulsed current
0 mA
Nerve Block
®
NEUROPROBE
500 PRO USER MANUAL
RANGE OF USER
ADJUSTABLE VALUES
0 – 50%
0 – 20 Seconds
ON or OFF
0 – 20%
0 – 99 Minutes
0 – 99 mA
RANGE OF USER
ADJUSTABLE VALUES
0.1 – 15.0 Hz
+/- or + or -
0 – 999 Seconds
0 – 1.5 mA
Advertisement
Table of Contents
