Advertisement
FAIL symbol will show on the primary display. Press CAL key again to save the calibration data and enter into the short
calibration mode.
4) In short calibration mode, the secondary display will show "Srt". There are two ways for short state input:
a When using square terminals, insert the short socket to the square terminals and make L
hang in the air (shown in figure 6);
b When using L
/L
CUR
"L
" terminal and "H
POT
Figure 6
5) Press CAL key and the 30-second countdown will be shown on LCD panels. If the short calibration is finished, the PASS or
16
/H
/H
terminals，insert the black and red testing lines with alligator clip into the "L
POT
POT
CUR
" , "H
" terminal respectively. Connect the mouth of clips. (shown in figure 7).
CUR
POT
Figure 7
АМM-3320
/L
/H
/H
terminals
CUR
POT
POT
CUR
" ,
CUR
Advertisement
