Safety International Safety Symbols This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual for further information. This symbol, adjacent to a terminal, indicates that, under normal use, hazardous voltages may be present Double insulation SAFETY NOTES ...
Meter Description 1. Current clamp 2. Clamp trigger 3. Data Hold and Backlight button 4. Mode select button 5. LCD display 6. COM input jack 7. Rotary Function swith 8. Range select button 9. Hz/%duty button 10. Relative button MO DE 11.
AC Voltage bandwidth 50~400Hz (VAC) Operating Temperature 14 to 122 F (-10 to 50 Storage Temperature -14 to 140 F (-30 to 60 Relative Humidity 90%(0 C to 30 C); 75%(30 C to 40 C); 45%(40 C to 50 Altitude Operating: 3000m;...
Page 6
•))) position. Set the function switch to the Use the multifunction MODE button to select resistance. Touch the test probe tips across the circuit or component under test. It is best to disconnect one side of the device under test so the rest of the circuit will not interfere with the resistance reading.
Page 7
The backlight function illuminates the display and is used when the ambient light to too low to permit viewing of the displayed readings. Press the (HOLD) button for one second to turn the backlight on and press the button a second time to turn the backlight off.