Control Level 2; Main Menu Overview - Wolf BML Operating Instructions Manual

Overview
Main menu
Back
Displays
Fault ackn.
Basic settings
Time program
Holiday prog
Specialist
Back
Displays
Acknowledge faults
Basic settings
Time programs
Holiday program
Specialist
14
Control level 2 - Main menu
Pressing the r.h. rotary selector calls up control level 2, where
you can select the menu levels shown in the overview by turning
the rotary selector clockwise. After selecting the parameter, you
enter the submenu by pressing the r.h. rotary selector again.
Pressing the Info key takes you back to the default display,
irrespective of which submenu is currently displayed.
The system also returns to the default display automatically when
no adjustment is made for more than one minute.
All available set and actual temperatures, the operating mode and
other system values can be displayed.
This is explained in the „Displays" chapter.
Acknowledging (resetting) faults that have occurred.
This is explained in the „Acknowledge faults." chapter.
Setting of the most important parameters in the ventilation system
such as time, date, room temperature, night temperature, supply
air minimum limit for heating, backup temperature, night setback,
and night ventilation.
Setting options and explanations of the individual parameters are
given in the "Basic settings" chapter.
Modification of the time switch programs for heating operation.
Setting options and how to modify the individual time programs
are explained in the "Time programs" chapter.
Five different holiday programs can be set. The holiday program
takes precedence over the normal switching time.
When the holiday program ends, the system returns to the previously
set time program automatically.
Setting the specialist's parameters for the ventilation system.
Setting options and explanations of the individual parameters are
given in the "Specialist" chapter.
Back to the default display
3063527_201308