Control Level 1; L.h. Rotary Selector, Program Selection; R.h. Rotary Selector; Program Selection - Wolf BML Operating Instructions Manual

Program selection

10

Control level 1

L.h. rotary selector, program selection

This rotary selector enables the program to be selected. The rotary
selector can be rotated indefinitely, without an end stop. You will
feel it click into each position as it rotates. The selected function
is indicated by an arrow in the display.

R.h. rotary selector

The right hand rotary selector is used for all programming steps.
Turning the rotary selector enables you to select the required
menu item.
Pressing the r.h. rotary selector confirms the programming step.
You can select the programs listed below by turning the l.h. rotary
selector.
The arrow on the l.h. edge of the display points to the selected
program.

Automatic mode

Ventilation according to a time switch program. Call-up of HR,
reheater and fan according to demand.
As shown in the diagram, you can preselect the operating mode
via the time program when the system has been switched off.
On
Backup mode
Off
07:00
06:00
Setback mode program
Selection:
- Economy operation
- Backup mode (factory setting)
- Standby
- Summer ventilation
„Day mode"
14:00
22:00
Backup mode
Time
3063527_201308