Zone Z1; Day Temperature; Economy Temperature For Heating; Backup Temperature For Heating - Wolf BML Operating Instructions Manual

Z1 Zone 1
Basic settings
Back
Language
Date
Time
Autom. summert.
Key lock
Z1 Zone 1
Tagtemperatur

[Day temperature]

Basic settings
Back
Day temperature
Econ temp htg
Backup temp htg
Speed adjust
Setback prog
Back
Factory setting: 20 °C
Range: 5 - 50 °C
Economy temperature
Heating
Basic settings
Back
Day temperature
Econ temp htg
Backup temp htg
Speed adjust
Setback prog
Back
Factory setting: 16 °C
Range: 5 - 30 °C
Backup temperature
Heating
Basic settings
Back
Day temperature
Econ temp htg
Backup temp htg
Speed adjust
Setback prog
Back
Factory setting: 12 °C
Range: 5 - 30 °C
3063527_201308
Control level 2 - Default settings
Select "Z1 Zone 1". If there is more than one zone in the
system, select the zone for which you want to change values
(max. 1-7) and confirm your selection by pressing the r.h. rotary
selector again. You can now modify the following values for
the selected zone one after the other by turning the r.h. rotary
selector.
Select and confirm Day temperature using the r.h. rotary
selector. Turn the r.h. rotary selector to set the required
temperature and then press to confirm.
Select and confirm Economy temperature heating using the r.h.
rotary selector. Turn the r.h. rotary selector to set the required
economy temperature and press selector to confirm.
Select and confirm Backup temperature heating using the r.h.
rotary selector. Turn the r.h. rotary selector to set the required
backup temperature for heating and press selector to confirm
(see "Standard functions" - "Central heating backup mode").
19