Holiday Program - Wolf BML Operating Instructions Manual

Holiday prog
Holiday prog
Zone overview
Back
Z1 Zone 1
Z2 Zone 2
Back
Holiday prog Zone
1
Back
Holiday prog 1
Holiday prog 2
Holiday prog 3
Holiday prog 4
Holiday prog 5
Back
Holiday prog
Zone 1
Back
Holiday start
Date 01/01/09
Time 00:00
Holiday start
Date 01/01/09
Time 00:00
Prog. selection
Standby
Back
3063527_201308
Control level 2 - Holiday prog
Press the r.h. rotary selector to change to control level 2.
Turn the r.h. rotary selector clockwise to select the „Holiday program"
[Holiday program] menu and confirm the selection by pressing the
r.h. rotary selector again.
Select the zone for which you want to program the holiday times
and confirm by pressing the selector.
Select the holiday program (from 1 to 5) for which you want to
program the holiday times and confirm your selection by pressing
the r.h. rotary selector again.
Turn the r.h. rotary selector to select the date for holiday start and
press selector to confirm.
Turn to set the required date and press selector to confirm.
Follow the same procedure to set the time.
Then set the date and time for holiday end.
Next, under Prog. selection, select "Standby" and
confirm by pressing the selector.
You can select from the following:
- Standby (factory setting)
- Backup mode
- Econ.operation
- Hols day mode
- Summer ventil.
Follow the same procedure for holiday programs 2 to 5.
23