Advertisement
1.4. Setting the operating mode
3063528_201308
Control level 1
L.h. rotary selector, program selection
This rotary selector enables the program to be selected. The rotary
selector can be rotated infinitely and has noend stop. You will feel
it click into each position as it rotates. The selected function is
indicated by an arrow in the display.
Set the arrow to the clock symbol.
Automatic mode
Ventilation or air change according to a time program. Activation
of HR, reheater and fan according to demand.
As shown in the diagram, you can preselect the operating mode
via the time program when the system has been switched off.
This is explained in the section "Automatic mode" in the operating
instructions.
On
Backup mode
Off
07:00
06:00
Program for setback mode
Selection:
R.h. rotary selector
All programming is done using the right hand rotary selector.
Turning the rotary selector enables you to select the required
menu item.
Pressing the r.h. rotary selector confirms the programming step.
„Day mode"
- Economy operation
- Backup mode (factory setting)
- Standby
- Summer ventilation
Backup mode
Time
14:00
22:00
3
Advertisement
