System Configuration - Wolf BML Operating Instructions Manual

LM001 configuration K20
Description:
System layout:
Ice sensor
Temperature sensor,
supply air
Silencer,
exhaust air
Silencer,
supply air
EC fan,
extract air
EC fan,
supply air
Reheater
(accessory)
Repair switch
Control panel
Programming unit
of BML control unit
Power cable
Intake grille
3063527_201308

System configuration

Ventilation unit with room or extract air temperature
control, variable fan motor control via 0-10 V signal
(EC motors). Plus installed heat recovery systems
CO -dependent speed adjustment
2
This configuration is used for the ventilation of buildings. The
room/extract air temperature is captured by a sensor, with HR
and the reheater coil being switched on and off according to
demand.
The fan speed is adjusted via a CO
SUP EHA
ETA
Condensate
pump (accessory)
sensor (accessory).
2
Filter pre-drying
ODA
(accessory)
Electrical connection
for EHA and ODA
dampers
Temperature sensor,
outdoor air
F7 compact filter,
supply air
Differential pressure cell
Bypass damper with
servomotor
Countercurrent
plate heat exchanger
Condensate pan
Differential pressure cell
F5 compact filter,
extract air
Temperature sensor,
extract air
Adjustable feet
CO sensor
2
(accessory)
39