Brocade VDX 6710 Operation
In this chapter
•
•
•
•
•
•
Powering on the Brocade VDX 6710
For details about powering on the Brocade VDX 6710, refer to
page 10.
Powering off the Brocade VDX 6710
To power the Brocade VDX 6710 off, power off both power supplies by setting each power supply
switch to "O.".
LED activity interpretation
System activity and status can be determined through the activity of the LEDs on the switch.
There are three possible LED states: off (no light), a steady light, and a flashing light. Flashing lights
may be slow, fast, or flickering. The lights are green or amber. See
LED behavior.
Sometimes, the LEDs flash either of the colors during boot, POST, or other diagnostic tests. This is
normal; it does not indicate a problem unless the LEDs do not indicate a healthy state after all boot
processes and diagnostic tests are complete.
Brocade VDX 6710 LEDs
The Brocade VDX 6710 switches have the following LEDs:
•
One system status LED on the port side.
•
One power status LED on the port side.
Brocade VDX 6710 Hardware Reference Manual
53-1002xxx-01
DRAFT: BROCADE CONFIDENTIAL
Powering on the Brocade VDX 6710 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
LED activity interpretation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
POST and boot specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Interpreting POST results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Brocade VDX 6710 maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Brocade VDX 6710 management - Mgmt Cluster??? . . . . . . . . . . . . . . . . . . 31
"Providing power to the switch"
Table 2
on page 25 for details on
Chapter
4
on
23