Testing connectivity
After you install the network cables, you can test network connectivity to other devices by observing
the LEDs related to network connection and perform trace routes. See
description of the port states.
Creating Brocade inter-switch link trunks
In VCS mode, unless specifically disabled, inter-switch link (ISL) trunking between adjacent
switches is automatic. All ports must be in the same port group and must be configured at the
same speed. There is a limit of eight ports per trunk group. No separate licensing is required. For
more information about Brocade trunks, see the Brocade Network OS Administrator's Guide.
Brocade VDX 6710 Hardware Reference Manual
53-1002xxx-01
DRAFT: BROCADE CONFIDENTIAL
Creating Brocade inter-switch link trunks
Table 2
3
on page 22 for a
21