Advertisement
7.Remove the foam from the back of the logo
board.
10.Elevate the build plate to its limit.
Notes: Do not let build plate touch extruder.
8.Place the dual extruder on the extruder seat,
as shown.
11.Take two rolls of filament and two pieces
of foam out of the printer.
Notes: Take two spool locks out from foam.
9.Remove the foam from the back of the logo
board.
12.Depress the build plate to its bottom.
Congratulations! You're finished the
unpacking process. (Tip: Save your packing
for future transportation and storage.)
Advertisement
Need help?
Do you have a question about the inventor and is the answer not in the manual?
Questions and answers