Turning On Auto-Calibration; Adjusting The Density - QuickLabel Kiaro! 200 User Manual

Kiaro! 200 User Guide

Turning On Auto-Calibration

If the top-of-form sensor threshold has been adjusted in the Threshold Adjustment
window, the printer will use the adjusted calibration value.
Use the auto-calibration feature to disable this adjustment and return the printer to the
default automatic calibration mode.
1 Launch the Kiaro! 200 Maintenance Utility.
From the Windows Start Menu, choose
Kiaro! 200 > Kiaro! 200 Maintenance
open.
Select a display language and the Kiaro! 200 printer you want to connect to.
Choose OK.
2 Choose the Adjustments
3 Choose Turn Auto-Calibration
be cleared and automatic calibration will be enabled.
Related Topics:
- Adjusting the Top-of-Form Threshold on page 79

Adjusting the Density

Use this adjustment if you notice color density differences between the areas printed
by each printhead.
1 Ensure that 8.35 x 6.1 in. (212 x 155 mm) media is loaded.
2 Launch the Kiaro! 200 Maintenance Utility.
From the Windows Start Menu, choose
Kiaro! 200 > Kiaro! 200 Maintenance
open.
Select a display language and the Kiaro! 200 printer you want to connect to.
Choose OK.
3 Choose the Adjustments
Start > All Programs > QuickLabel
Utility. A language and printer prompt will
tab.
On. Top-of-form sensor threshold adjustments will
Start > All Programs > QuickLabel
Utility. A language and printer prompt will
tab.
Kiaro! 200 Maintenance Utility
81