Adjusting The Top-Of-Form Threshold - QuickLabel Kiaro! 200 User Manual

Kiaro! 200 User Guide
• Head - Select the color of the missing line and the affected printhead. In the
previous example, a missing line appeared in the black pattern of the right
printhead (K1).
• Page - Choose whether the missing line is on the first or second test page for
the selected color. In the previous example, the missing line occurred on page
one of the two-page black pattern.
• Row - Enter the row number of the missing line. In the previous example, the
missing line occurred in row 50.
• Column - Enter the column number of the missing line. In the previous
example, the missing line occurred in column 9.
Choose Add to List
process for all missing lines.
9 If necessary, you can delete items from the adjustment list by selecting the item
and choosing Remove from
10 When you are finished entering adjustments, choose
The pattern will be reprinted, but with your adjustments applied. Examine the
pattern to ensure the missing lines you entered now appear correctly.
11 Choose Close when you are finished entering missing nozzle adjustments.
Related Topics:
- Cleaning Printheads on page 61

Adjusting the Top-of-Form Threshold

If any of the following errors occur while using reflective mark media, you may need to
calibrate the top-of-form sensor threshold. The following table describes the types of
adjustments needed for each error condition.
Error # Error Name
1002 No paper
1102 Paper length is too short
1104 Paper length is too short
1301 Paper jam occurred
1302 Paper jam occurred
1304 Paper jam occurred
1305 Paper jam occurred
1306 Paper jam occurred
to add the missing line to the adjustment list. Repeat this
List.
Sensor Adjustment
Internal
Increase
Increase
NA
Decrease
Decrease
NA
NA
NA
Kiaro! 200 Maintenance Utility
Print Confirmation Pattern.
Adjust-
Cutter ment Value
NA +0.2V
NA +0.2V
Increase +0.2V
NA -0.2V
NA -0.2V
Increase +0.2V
Decrease -0.2V
Increase +0.2V
79